AquaComfort
Features |
Benefits |
Competition |
| Designed and made for cooler climate markets | Efficiently heats pool water even in air temperatures as low as 40 degrees. Works earlier and later in the season when the pool owner needs heat the most | Designed primarily for Florida, they work only at temperatures above 50 degrees. Some even stop working at air temperatures as high as 62 degrees. |
| Micro-computer
control technology Ease of operation and maintenance |
Programmed micro-computer is the brains of the AquaComfort heat pump, allowing the heater to work very efficiently down to 40 degrees, as well as acting as a service analyzer to notify the pool owner of any problems should they arise. Introduced by our engineers in 1989, you can trust our technology. Reliability and experience the competition doesn't have. | Most other heat pumps provide either a digital temperature display or control knobs to control pool temperature. The digital display gives the appearance of a programmed board when it's no more than an LED readout. The result is poor performance below 60 degrees. |
| Turboguard heat exchanger | Incorporates fusion blended alloy technology for long life, protection against corrosion and superior performance. We incorporate more heat transfer capability in a heat exchanger less than half the size of the competition. It's the next step in heat exchanger technology. | Use a variety of heat exchangers including coated stainles steel and titanium. While good against corrosion, these heat exchangers sacrifice efficiencyand performance, meaning they cost more to operate (some 50% more than AquaComfort) and they don't perform when needed most (in lower temperatures). OK for Florida but not the rest of the continental US |
| Advanced
manufacturing and lab facilities |
Our lab facilities are second to none, allowing us to expertly match our components for the best performance and highest efficiency. With more than twice the manufacturing capability of our nearest competitor and over thirty years of design experience, our heaters`are built to perform. | Smaller facilities, some with no labs at all. They don't have the production capability or design experience we have. |
| More heat, higher efficiency | Because we operate at lower temperatures, our heat pumps input 30-40% more heat/day than the competition. And we do it at efficiencies that are the best in the industry, meaning more heat at less cost | Handicapped by designs developed for Florida, oversized heat exchangers that don't perform as well as ours and limit their ability to perform below 50 degrees and the inability to proficiently match components for optimum performance. |